MedSpec DynaTrack Patella Stabilizer with Metal Hinges

$189.95

Patella Control with Added Knee Stability

The MedSpec DynaTrack Patella Stabilizer with Metal Hinges combines an adjustable internal patella buttress with medial and lateral aluminum hinges. It is designed to support patellar tracking while providing added side-to-side knee stability and assistance controlling knee hyperextension.

Choose the Correct Side and Size

This brace is side-specific and must be ordered for the left or right knee. Measure the circumference directly around the centre of the kneecap and use the sizing chart before selecting your variation.

MedSpec DynaTrack Patella Stabilizer Sizing Guide

How to Measure

Measure the circumference directly around the centre of the kneecap. Keep the measuring tape level and comfortably snug without pulling it tightly into the skin. Select the size that matches your knee circumference.

SizeKnee Circumference
X-Small10–12 inches (25.4–30.5 cm)
Small12–14 inches (30.5–35.6 cm)
Medium14–16 inches (35.6–40.6 cm)
Large16–18 inches (40.6–45.7 cm)
X-Large18–20 inches (45.7–50.8 cm)
XX-Large20–22 inches (50.8–55.9 cm)

Select the Correct Side

The MedSpec DynaTrack Patella Stabilizer is side-specific. Choose Left for the left knee or Right for the right knee. The two versions are not interchangeable because the internal patella buttress is positioned differently for each knee.

Between Sizes?

Proper positioning of the patella buttress is important for fit and function. Contact The Physio Store before ordering when your measurement falls directly on a sizing boundary or you are unsure which size to select.

MedSpec Logo
Description

The MedSpec DynaTrack Patella Stabilizer with Metal Hinges is designed for people who require targeted kneecap control together with stronger medial and lateral knee support. Its dynamic internal buttress applies adjustable pressure against the patella, while the side hinges provide a more stable support structure than a basic patella sleeve.

Dynamic Patella Control with Metal-Hinge Stability

The DynaTrack design brings the internal patella buttress and hinged support system together. The buttress is positioned directly against the appropriate side of the kneecap, while adjustable straps allow the amount of pressure to be changed for comfort and support. Medial and lateral aluminum hinges add side-to-side stability and help control excessive knee hyperextension.

How the DynaTrack Design Works

The brace uses a side-specific patella buttress to apply adjustable pressure to the lateral side of the kneecap. This helps guide patellar tracking through knee movement. SkinLoc™ material helps keep the buttress in position, while an additional SkinLoc pad grips the upper calf area to help prevent the brace from sliding downward.

FeaturePurpose
Aluminum side hingesProvide increased medial and lateral knee stability.
Internal patella buttressApplies direct, adjustable pressure to support patellar tracking.
SkinLoc™ buttress liningHelps keep the patella buttress properly positioned.
Anterior closureAllows the brace to open completely from the front for easier application and adjustment.
Internal SkinLoc padGrips the upper calf to help reduce downward migration.
Open popliteal areaReduces material bunching behind the knee during flexion.
CoolFlex™ materialProvides a breathable alternative to a traditional neoprene knee brace.

Common Reasons for Using This Brace

The manufacturer identifies the DynaTrack hinged patella brace for conditions involving kneecap instability, abnormal patellar movement or the need for additional knee support.

  • Patella subluxation
  • Patella dislocation
  • Chronic patellar maltracking
  • Patellofemoral pain syndrome
  • Support following a lateral release procedure
  • Support following patellar realignment
  • Situations requiring patellar support with added medial and lateral stability

Left and Right Braces Are Not Interchangeable

Select Left for the left knee and Right for the right knee. The internal buttress is positioned differently in each version so it can apply pressure to the lateral side of the appropriate kneecap. Choosing the incorrect side will place the buttress in the wrong position.

How to Measure for the Correct Size

Measure the circumference around the knee at the centre of the patella. Keep the measuring tape level and comfortably snug without pulling it tightly into the skin. Do not choose the brace from a pant or clothing size.

SizeKnee Circumference at Mid-Patella
X-Small10–12 inches
Small12–14 inches
Medium14–16 inches
Large16–18 inches
X-Large18–20 inches
XX-Large20–22 inches

Between Sizes or Unsure About the Correct Side?

A precise fit is important because the patella buttress must sit in the correct position and the SkinLoc pad must contact the upper calf. Contact The Physio Store before ordering when your measurement falls directly on a sizing boundary or you are unsure which configuration has been recommended.

How to Put On the Brace

  1. Open all straps and place the brace around the knee with the closure opening at the front of the leg.
  2. Align the kneecap within the front opening and position the internal buttress against the correct side of the patella.
  3. Fasten the shorter inner straps above and below the knee.
  4. Pull and secure the buttress straps until the desired patella pressure is achieved.
  5. Fasten the longer outer straps and confirm that the brace feels secure without restricting circulation.
  6. Bend and straighten the knee several times and readjust the straps when necessary.

Cleaning and Care

Hand wash the brace in warm water using mild detergent and no bleach. Rinse thoroughly and allow it to air dry completely. Close the hook-and-loop straps before cleaning to help prevent damage to the brace or other materials.

Product Specifications

ManufacturerMedical Specialties, Inc. — MedSpec
ProductDynaTrack™ Patella Stabilizer with Metal Hinges
Brace TypeSide-specific hinged patella stabilizer
HingesMedial and lateral aluminum hinges
MaterialCoolFlex™
ColourBlack
Side OptionsLeft or Right
SizesX-Small through XX-Large
MeasurementKnee circumference at the centre of the patella
Country of OriginMade in USA
UseSingle-patient use
Manufacturer Warranty6 months against defects in materials or workmanship

Important Use Information

Stop using the brace and consult a healthcare professional if you experience increased pain, swelling, numbness, circulation changes or another unusual reaction. This product is designed for a single patient and cannot guarantee that an injury will be prevented.

Frequently Asked Questions

Click on the question to reveal the answer!
What is the MedSpec DynaTrack Patella Stabilizer with Metal Hinges used for?

It is designed to support patellar tracking while adding medial and lateral knee stability. The manufacturer lists patella subluxation, patella dislocation, chronic patellar maltracking, patellofemoral pain syndrome, post-lateral release and post-patellar realignment among its common indications.

Is the DynaTrack brace different for the left and right knee?

Yes. This brace is side-specific. The left version is designed for the left knee and the right version is designed for the right knee. The internal patella buttress is positioned differently so it can apply pressure to the lateral side of the appropriate kneecap.

How do I measure for the correct DynaTrack knee brace size?

Measure the circumference around the knee directly through the centre of the patella. Keep the measuring tape level and comfortably snug. Do not select the brace based on a clothing or pant size.

What should I do if my knee measurement falls between sizes?

Contact The Physio Store before ordering when your measurement is directly on a sizing boundary. Proper fit is especially important because the internal patella buttress and SkinLoc pad must sit in the correct locations.

Can this brace help with patellar maltracking?

The adjustable internal buttress is designed to apply direct pressure to the patella and support its tracking during knee movement. A healthcare professional can determine whether this type of brace is appropriate for your specific cause of maltracking.

Additional information
Weight350 g
Dimensions30 × 22 × 6 cm
HS Code9021.10.00.00 Orthopaedic or fracture appliances
Country of OriginUSA
Left/RightLeft, Right
SizeLarge, Medium, Small, X-Large, X-Small, XX-Large
Availability Now available in-store at
22635 Komoka Road Komoka N0L1R0

Powered With Oliver Pos

Reviews (0)

Reviews

There are no reviews yet

Add a review
Currently, we are not accepting new reviews
Frequently Asked Questions
Click on the question to reveal the answer!
What is the MedSpec DynaTrack Patella Stabilizer with Metal Hinges used for?

It is designed to support patellar tracking while adding medial and lateral knee stability. The manufacturer lists patella subluxation, patella dislocation, chronic patellar maltracking, patellofemoral pain syndrome, post-lateral release and post-patellar realignment among its common indications.

Is the DynaTrack brace different for the left and right knee?

Yes. This brace is side-specific. The left version is designed for the left knee and the right version is designed for the right knee. The internal patella buttress is positioned differently so it can apply pressure to the lateral side of the appropriate kneecap.

How do I measure for the correct DynaTrack knee brace size?

Measure the circumference around the knee directly through the centre of the patella. Keep the measuring tape level and comfortably snug. Do not select the brace based on a clothing or pant size.

What should I do if my knee measurement falls between sizes?

Contact The Physio Store before ordering when your measurement is directly on a sizing boundary. Proper fit is especially important because the internal patella buttress and SkinLoc pad must sit in the correct locations.

Can this brace help with patellar maltracking?

The adjustable internal buttress is designed to apply direct pressure to the patella and support its tracking during knee movement. A healthcare professional can determine whether this type of brace is appropriate for your specific cause of maltracking.

Can the DynaTrack help with patellofemoral pain syndrome?

Patellofemoral pain syndrome is one of the manufacturer-listed indications. The brace supports the kneecap with an adjustable buttress while the side hinges provide additional knee stability. Results will depend on the underlying cause of the symptoms.

What is the difference between the DynaTrack Plus and the DynaTrack with Metal Hinges?

The DynaTrack Plus uses removable plastic hinges and is generally a lower-profile patella stabilizer. This version uses stronger medial and lateral aluminum hinges and must be selected specifically for the left or right knee.

Does this brace stop knee hyperextension?

The hinged design is intended to help control knee hyperextension, but it is not a rigid range-of-motion brace with adjustable extension stops. A healthcare professional should recommend the appropriate brace when strict motion restriction is required.

Can the DynaTrack hinged brace be worn for sports?

It may be worn during appropriate activities when recommended by a healthcare professional. The open area behind the knee reduces bunching during flexion, while the CoolFlex material is intended to provide better breathability than traditional neoprene.

How do I put on the DynaTrack knee brace?

Open all straps, wrap the brace around the knee and close the front opening. Position the kneecap in the opening, secure the shorter inner straps, adjust the patella buttress straps and then fasten the longer outer straps.

How tight should the patella buttress straps be?

Tighten the straps enough to apply comfortable, controlled pressure against the patella. The brace should not cause numbness, tingling, increased pain, skin discolouration or circulation changes.

How do I wash the MedSpec DynaTrack brace?

Hand wash it in warm water using mild detergent and no bleach. Rinse thoroughly and air dry. Close the hook-and-loop straps before washing.

Is the DynaTrack knee brace covered by a warranty?

MedSpec provides a six-month limited warranty against defects in materials or workmanship. Normal wear, incorrect use, alterations, accidental damage and improper cleaning are not considered manufacturing defects.

Can I return the brace after trying it on?

The brace must remain unused, unworn, clean and in its original packaging to qualify for return. Braces that show signs of wear or direct use cannot be returned for hygiene reasons. Contact The Physio Store before returning any product.

Is this knee brace tax exempt in Canada?

An off-the-shelf knee brace is normally taxable. It may qualify for zero-rated GST or HST treatment when purchased under a qualifying written order for the customer named in that order. Submit the documentation to The Physio Store for review.

Will private insurance cover this hinged knee brace?

Coverage depends on the individual insurance plan. Some plans require a prescription, diagnosis, product description or proof of purchase. Customers should confirm their plan requirements before ordering.